STATUS SEM203P TEMPERATURE TRANSMITTER

The SEM203P is a temperature transmitter that can provide an ideal solution to generate the industry standard 4 to 20mA signal when connected to a Pt100 temperature probe.

The simple push button operation will range and calibrate the SEM203P temperature transmitter, thus removing the need for soldering links, potentiometers or PC's.

This transmitter uses the latest digital technology to ensure accurate drift free linearisation.

The SEM203 is linearised to comply with all common RTD sensor standards i.e. 0.00385, 0.003916 etc.

This transmitter has an integrated LED which indicates the successful completion of the range programming and also provides an instant analysis of the sensor's health.

STATUS SEM206P TEMPERATURE TRANSMITTER

The SEM206/P is a cost effective “smart” in head transmitter that accepts PT100 temperature sensors and converts sensor output over a configured range to a standard industrial (4 to 20) mA transmission signal.

The PC configuration provides the user with options to select Range, units and Burnout direction, without requiring calibration equipment.

Configuration is very fast due to the new USB port driven configurator. This can be done by simply connecting two clips to the SEM206/P loop terminals and following the software instructions. Calibration set up may be saved as a file on the PC for later use.

The SEM206/P in head transmitter uses cutting edge digital technology to ensure high accuracy and drift free performance. If required the desired range can be specified at the time of order, removing the need for user configuration. If the range is not specified then the transmitter will be shipped with the default range of 0 to 100 °C

STATUS SEM210 TEMPERATURE TRANSMITTER

•  10 Year Warranty 
•  Galvanically Isolated
• Universal Input  
• Versions for Hazardous Areas 
  
•  High Accuracy and Stability 
  
•  Sensor Referencing 
  
•  Easily Re-programmed 
• In Head Mounting
   
  

SEM210 is a second generation "Smart" Head Mount temperature transmitter which accepts most commonly used temperature sensors (also slide-wire sensors or mV inputs) and generates an industry standard (4 to 20) mA transmission signal.

Output range and other operating parameters are easily programmed using RCPW software running under "Windows" without the need for re-calibration.

Isolation is a standard feature to overcome any potential ground loop effects. Two microprocessors operate together to ensure error-free transmission across the isolation barrier.

A sensor referencing facility enables the transmitter to be accurately matched to a particular sensor.

STATUS SEM310 TEMPERATURE TRANSMITTER

• 10 Year Warranty
  
• HART Protocol
  
• Universal Input
  
• Versions for Hazardous Areas
  
• Sensor Burnout Detect
  
• Isolation to 500 VAC
  
• Spring Mounting 

The SEM310 is an encapsulated in-head temperature transmitter with an integral spring mounting kit that replaces the standard connecting block in the sensor head. It is small in size yet has a performance superior to other larger and more expensive transmitters.

The SEM310 has full HART communications protocol which allows the user to quickly and easily download information or interrogate the device.

A sensor referencing facility enables the transmitter to be accurately matched to a particular sensor.
 

STATUS STA100 TEMPERATURE TRANSMITTER

All wetted parts 316 Stainless Steel
Standard DIN Connectors
(4 to 20) mA Output
(0 to 100) Deg C
Cost Effective

The STA100 is a cost effective sensor and transmitter assembly housed in a 316 Stainless Steel body with integral sensor and DIN connector. Standard immersion lengths are 50, 75, 100, and 150mm with a ½” BSP process connection. The transmitter provides a fixed range of (0 to 100) Deg C. Other ranges and configuration can be accommodated to order.

STATUS SEM215 TEMPERATURE TRANSMITTER

• UNIVERSAL INPUT
  
• QUICK SELECTOR / PC CONFIGURABLE
  
• GALVANICALLY ISOLATED
  
• LOOP POWERED
  
• COMPACT DIN RAIL MOUNTED
  
• 10 YEAR WARRANTY

The SEM215 is a universal DIN rail mounted temperature transmitter that accepts most commonly used temperature sensors, slide wire transducers or millivolt signals, isolates and transmits them as a (4 to 20) mA signal to a host system. It can be configured by either of the following methods:

Configuration using “Quick Selector”

One of 59 pre-set ranges can be selected by using switches. The switch, located close to the rail clip, is inaccessible in normal use. This “Quick Selector” method does not require any additional calibration, and the transmitter can be put into service immediately after selection is made.

Configuration via PC

The sensor type and range are easily programmed using a PC and a simple Windows based software programme. This allows for re-programming or interrogation of the SEM215 while it is installed in the loop. Sensors can be changed without the need for re-calibration. Special sensors can be accommodated by using the type “X” option, the characterisation for these sensors are factory entered for later retrieval from the menus.

The transmitter is very compact enabling a high packing density to be achieved and by using the latest tension clamp technology for the two part terminals, connections are made in half the time taken to wire conventional screw terminals.

These terminations are maintenance free and the tension clamp ensures that the contact is permanently under tension eliminating any potential problem of loosening due to temperature fluctuations or vibration.

A DIN Rail Temperature Transmitter, with HART Protocol, the SEM315 accepts RTD, Thermocouple, mV and slidewire sensors.

The SEM315 temperature transmitter has full HART communications protocol which allows the user to quickly and easily down-load information or interrogate the device enabling the following:-

• Simple re-ranging of sensor type and range
• Easy on site re-calibration
• Self documentation
• Operation with proprietary software packages such as AMS Plant Web™ and Cornerstone™
• Remote configuration on the (4 to 20) mA loop with a hand held communicator or with a PC & HART modem
• Online Digital communication concurrent with a (4 to 20) mA Analogue signal.

All the standard HART universal and common usage commands are fully implemented, with other device specific commands that enable access to the enhanced performance parameters of the SEM315.

The SEM1633 provides an accurate alarm / switching function when used with RTD or Slidewire sensors.
 
The flexible design can be used with any resistive sensor within the range of (10 to 10500) Ohms meaning Pt100, 500, 1000, Ni or Cu sensors as well as slide wire sensors up to 100 K, can be accommodated.  Other sensor characteristics or your own 22 point linearisation characteristic (for slidewire or linear resistance) can be downloaded into the product enabling you to adapt it exactly to your application.

Trip outputs are independently configured for action, set point and dead band. Six actions are provided, Normal - High/Low/Deviation and Inverted - High/Low/Deviation.